WireGuard

--- name: WireGuard description: Configure WireGuard VPN tunnels with secure routing and key management. metadata: {"clawdbot":{"emoji":"🔐","requires":{"bins":["wg"]},"os":["linux","darwin","win32"]}} ---

AllowedIPs Traps (Most Common Mistakes)

• AllowedIPs means different things on each side — server: what peer CAN send; client: what to ROUTE through tunnel
• 0.0.0.0/0 routes ALL traffic including tunnel endpoint — breaks connectivity, must exclude server's public IP first
• Overlapping AllowedIPs between peers = undefined routing — each IP range must belong to exactly one peer
• Wrong mask silently breaks routing — /32 for single host, /24 for subnet, verify carefully

Connection Failures

• No handshake = wrong public key, firewall blocking UDP, or wrong endpoint — check all three, not just one
• One-way traffic = AllowedIPs misconfigured — packets go out but replies don't route back
• Missing PersistentKeepalive = 25 breaks NAT traversal — peer behind NAT unreachable after ~2 minutes
• Config file permissions must be 600 — wg-quick silently refuses to start with loose permissions

DNS Leaks

• Without DNS = in client config, DNS queries bypass tunnel — leaks real IP to DNS provider
• Full tunnel (0.0.0.0/0) without DNS config = false sense of security — traffic tunneled but DNS exposed

Routing Setup

• IP forwarding disabled by default on Linux — tunnel works but packets don't route between interfaces
• NAT required for internet access through tunnel — without masquerade, return packets don't find their way
• Firewall must allow UDP on ListenPort — WireGuard is UDP only, no TCP fallback exists

Key Security

• Private key file permissions matter — world-readable key is compromised, set 600 immediately after generation
• Never transmit private keys — generate on each machine, exchange only public keys
• Config files contain private keys — treat wg0.conf as secret, not just privatekey file

Live Changes

• Adding peers requires interface reload on most setups — or use wg set for live changes without dropping connections
• wg syncconf applies changes without restart — but config file format differs from wg.conf (use wg-quick strip)

Debugging

• wg show displays handshake timestamps — stale handshake (>2 min) means connection dead despite interface up
• Handshake happens on first packet — no traffic = no handshake attempt, ping to test